Roof Replacement in Pelham, GA
Got a house plus a barn, shed or shop to cover in Pelham, GA? Send one request through this free referral site, and it goes to a single independent roofer working in Mitchell County, who can look at every roof in one trip and price each in writing. The roofer, not you, pays the site's referral fee.
Not sure if we cover your area? Check now ↓
Ask for a Roof Estimate
Takes about 30 seconds. One local roofer gets it and contacts you.
Your request goes to one independent roofer who works in and around Albany, GA, and that roofer contacts you directly. See our Referral Marketing Disclosure.
Metal, Shingles and the Roofs Out Back
Pelham stands where US 19 crosses SR 93 in Mitchell County, about 37 miles south of Albany, GA, the Dougherty County seat. The city was incorporated in 1881, counted 3,507 residents in 2020 and goes by the slogan "A City of Pride and Progress."
Cotton and pecan farming anchor the local economy, so plenty of properties around town have more than one roof to think about. This page covers metal on houses and outbuildings, how the two main panel types differ, and how to get several buildings priced at once.
Houses, Barns and Shops in Pelham, GA
Census survey figures put the median owner home value at about $93,800 and median household income at about $39,023, so most owners weigh every roofing dollar. Many houses in town wear asphalt shingles, while barns, equipment sheds, carports and shops are often covered in metal panels.
Some owners now choose metal for the house as well, partly to match the outbuildings and partly for its longer service life. On older metal roofs, look for rust at panel laps and cut edges, screws backing out and rubber washers cracked by years of sun. Those are the usual reasons a barn roof starts to leak.
Roof Services in Pelham, GA
- Metal for houses and outbuildings. Exposed-fastener and standing-seam panels, priced building by building. The metal roof page goes deeper on both.
- Whole-house replacement. When the house roof is done, the roofer strips it, checks the deck and builds it back up. See roof replacement.
- Shingles on the house, metal out back. A common mix that keeps the house budget down. Compare options on the shingle roof page.
- Fastener and flashing repairs. Re-screwing panels or resealing a leaking lap can buy a barn roof years. See roof repair.
- Wind-lifted panels. The storm damage page explains what to record after a blow.
Weather Facing Mitchell County Roofs
No storm event has been verified for Pelham itself. The nearest record is a county-level one from January 2, 2017, when an EF1 tornado tore at roofs in the north end of Mitchell County, according to the National Weather Service. That was well north of town.
The steadier wear comes from the seasons. Spring and summer thunderstorms bring gusty wind that can catch a loose panel edge, and tropical-storm rain in late summer and fall finds any gap at a lap or ridge. Strong sun and heat make metal expand and contract every day, which slowly works exposed screws loose.
- A lifted panel edge. Once wind gets under one corner, the next storm can peel more of the sheet.
- Drips at screw lines. Rows of small leaks often trace back to worn washers rather than holes in the metal.
- Rust at laps and cut edges. Surface rust can be treated; rust that has eaten through usually means new panels.
Permit Questions in Pelham, GA
The City of Pelham's Code Enforcement / Planning / Zoning office issues building permits, but its page doesn't say whether roofing work needs one. Ask the city before work starts, and include any barn, shed or shop you plan to re-roof, since outbuildings can follow different rules. The office can be reached at (229) 294-7900.
If a permit is required, ask the roofer to file it under the company's name. Pelham sets its own process, so don't assume it matches another city's.
Pricing Metal on More Than One Roof
For planning, here is what installed roofing averaged per square foot of roof across Georgia in 2026, from a published guide. No row is a bid from this site.
| Cost row | Figure | Source (year) |
|---|---|---|
| Georgia 3-tab shingles, per sq ft | about $5.05 | RoofObservations, 2026 |
| Georgia architectural shingles, per sq ft | about $5.55 | RoofObservations, 2026 |
| Georgia premium shingles, per sq ft | about $6.90 | RoofObservations, 2026 |
| Georgia exposed-fastener metal, per sq ft | about $7.40 to $9.25 | RoofObservations, 2026 |
| Georgia standing-seam metal, per sq ft | about $11.50 to $14.30 | RoofObservations, 2026 |
Exposed-fastener panels go on faster and cost less, but their screws need checking over the years. Standing seam hides its fasteners under raised seams and costs more up front. A plain barn roof with few cuts can come in lower per foot than a house with valleys and dormers, while a large shop simply has a lot of square feet. Ask for each building as its own line so you can stage the work. The cost calculator handles the house, and the cost guide explains each row.
What Pelham, GA Gets From This Service
- One trip, several roofs. Mention every building in your request so the roofer can measure them all in a single visit.
- Each roof on its own line. A split estimate lets you do the house now and the barn later, or all at once.
- Papers worth seeing. Since Georgia has no state-level roofing license, ask the roofer for a local business license and a certificate of insurance, plus a written contract and nearby references.
- A free request. You never pay this site, and it never offers you anything; it only hands your request to one independent roofer.
See Whether Your Area Is Covered
Type your town into the box to check coverage. If you're unsure whether the house roof needs replacing or just repairs, the short quiz below walks through age, material, wear, storms and past fixes.
Good to Know in Pelham, GA
Is standing seam worth the extra cost over exposed-fastener metal?
For a house you plan to keep, it can be, because hidden fasteners mean fewer screws to maintain and a cleaner look. For a barn or equipment shed, exposed-fastener panels are often the practical pick. The roofer can price both for each building so you can compare.
Can one roofer quote my house and my barn together?
Yes, if you ask for it. List every building in the request form, along with rough sizes if you know them. The roofer can measure them in one visit and write each roof as a separate line, so you decide which jobs to do and when.
Does a barn or shed roof in Pelham, GA need a permit?
That isn't spelled out on the city's page. The City of Pelham's Code Enforcement / Planning / Zoning office issues building permits, so ask that office about each building before work begins. If one is needed, the roofer should take it out in the company's name.
Will a metal roof be loud when it rains?
On a house, metal laid over solid decking and underlayment, with insulation in the attic, is usually no louder than many owners expect. Open-framed barns and sheds are noisier because nothing sits between the panels and the space below. Ask the roofer how your house roof would be built up.
Close to Pelham, GA
Up US 19 toward Albany, GA, Camilla, GA is the Mitchell County seat, and you can also look at Sylvester, GA in Worth County.
Get Pelham, GA Roof Numbers
When it suits you, send the request form and list every roof you'd like looked at. One independent roofer will contact you to plan a visit and then put the numbers on paper for each building.